5 Ribs Covered 1000mm PU Sandwich Panel Production Line With Double-Belt Conveyor

Rock Wool/Glass Wool/PU Sandwich Panel Production Line

With Double-Belt Conveyor

Introduction of machine

• A combination production line,wich can produce PU,rock wool,glass wool sandwich panels,with the function of edge foaming and sealing for rockwool,glass wool panels.
• High pressure glue spraying unit:glue is sprayed on up and down steels sheet directly,wich saves glue and insures quality by maximing the stickness of glue.
• Rotary type:block type,two turning.It is the most advanced and reliable technology,suitable for producing low density glass wool panels.
• Picture of production line

Primary technology parameters of PU sandwich panel product line

• Production Material(mm):(0.25-1.0)×L, yield strength≤G300 Colored steel
• Production speed:4-8 M/min
• Production type: totally continuous production with PLC controlling
• PU foam thickness: 25-100mm
• Composite structure:position fixed by double rubber tracker
• Foaming system: totally automatically continuous foaming, quantity of foaming could be stepless adjustable
• Power of production ≥ 22KW
• Total power ≥ 35 KW
• Cutting:pneumatic piston driving, non-stop cutting via sliding table
• Electronic controlling system: full-frequency PLC controlling system

Uncoiler roll forming machine

• Excellent groove design and forming technics of roll forming machine combine with aided design of German copre software which can release whole stress and reduce waves while roll forming and keep the final products with planeness.
• Two-side projecting shaft roll former,rollers can be fixed on two sides shafts.
• Fast vertical loading of roll forming stations
• Roll forming machine on two side can be bidirectional changed,matched with double-belt conveyor to keep center.
• Width adjusting device by using high-precision ball screw and linear guide,accuracy tolerance+/-0.5mm.
• Pre-heating room is made of 50mm PU Sandwich panel as fence,which decreases heat-loss substantially.

PU Sandwich foaming line

• Two sets of conveyor rack: up conveyor is about 24m, down conveyor is about 30m.They lead the steel sheet from the roll forming machine to preheating room and to foaming,to cutting.
• One preheating room: It is built by heat-insulation material, and it could heat up the steel sheet to 25-38 by heater.
• One set of PU two component Liquid mixing and injecting section for foaming : it adopt Chinese high pressure pump. It have the temperature control system and material-level monitoring system. The tank of the material is about 150L. Two tanks.
• Foaming and double rubber device include motor driver system to make panel.
• The width of belt board is 1250mm, the range of adjusting distance between upper and lower frame belt board: min 25mm, max 200mm. And the range of adjusting thickness of sandwich panel :30mm,50mm,100mm.(30-50 for celling , 50-100 for wall)

Double-belt conveyor

• The double belt adopts two-stage drive (belt plate iis driven by auxiliary fine-pitch chain),which eliminates the mechanical nonsynchronous.
• The double belt also is equipped flexible tight system to make the operation more stable and reliable.
• The width of double belt plate can reach to 267 mm by adopting high quality special material and elaborate welding heat treatment.
• The side and bottom moulds device of double belt has powerful functions which can produce the sandwich panels from 20-200mm in thickness and 600-1240mm in width.

Reference working flow

Introduction of company

We, Friendshachinery Co., Ltd, attaches great importance on technology innovation,progress has been made on scientific management as well as Co.,culture.Our manin products: Metal roof &wall panels machines, C&Z purlin machines drywall Stud-track forming machine,Metal decks machines,No- girder and Column curves forming machines,Guard rails forming machine,Downspout pipes forming machines and so on.

We can customize forming machine according to user's requirements.And we can provide professinal service,high quality,through design,and installation.

Warmly welcome to visit our factory no matter you are distibuters or end-users,and looking forward to cooperating with you for mutual benefits.

Contact Us

For more information, feel free to contact with us.

Skype:vivian_866

Mobile:86-15261519246

E-mail:sales02@roll-formingmachinery.com

vivianlucky866@gmail.com

We, Wuxi Friendship Machinery Co., Ltd, China leading expert in designing and manufacturing metal sheet roll forming machines, PU sandwich panel line. We achieve this by the most skilled, dedicated and diverse group of people in our industry.

Our key products: C/Z/U purline forming line, PU sandwich panel line, steel silo production line, Culvert Corrugated pipe production line, roof/tile/wall/deck/ forming machine, double layers forming machine, drywall stud and track roll forming machine, guardrail roll forming machine, downspout roll forming machine, gutter roll forming machine, simple slitting and cut to length machine, CNC folder/flashing machine, K span forming line, hydraulic decoiler, auto stacker and so on.   

We insist on providing quality products and service at affordable price for our clients. The performance record of our products is the backbone of Friendship Machinery's reputation. The proven ability of every set machine is why customers have returned to us repeatedly for new applications, designs and machinery as their products change and expand. We are proud of it

Our machines are well sold in South East and south Asia, Middle East, Africa, South America and East Europe, more than thirty countries.  

Warmly welcome to visit our factory and we are looking forward to cooperating with you for splendid future.