15 M / Min Working Speed Steel Stud Roll Forming Machine With Free Accessories

15 M / Min Working Speed k Span Roll Forming Machine With Free Accessories

Main Specification

Size: 9300mm × 2250mm × 2500mm

Total Weight: about 13tons

Main Motor Power: 17.0KW forming power is 7.5kw ; bending power is 3.0kw; cutting power is 3.0kw

Working Speed: Straight sheet: 15m/min

Arch sheet: 13m/min

Sewing: 6m/min

Material of rollers: 45# steel, quenched HRC 58-62

Material of roller shafts: 45# steel, adjusted

Material of cutting blade: Cr12 steel (Taiwan Airline Technique)

PLC Type: Germany Siemens

Step of rollers: 13 steps

Feeding Width: 914mm

Effective Width: 610mm

The depth of the groove: 203mm

Thickness of the coil: 0.8-1.5mm

Operating factor of the panel: 66%

Proper span:less than 36m

We provide you some accessories for free, with which you can begin to do projects immediately.

Technical parameter

I Description of the HF-MIC 240 machine

This MIC-240 machine is developed by ourselves with technology similar to ABM MIC-240 forming machine. It is comprised of mechanical expansion decoiler, straight panel forming unit, curving panel forming unit, hydraulic mould cutting device or electric mould cutting device, control system(PLC) or manual controller, out put shelf for straight sheet and curve panel,decoiler. All parts are installed on a mobile chassiss. So it is suitable for site operating.

II Features

1. All the rollers are forged from the high quality structural steel and are processed intensely. The surfaces of the rollers are plated with hard chromium. the rollers have a high hardness and long operating life.
2. The power set to automatically transport the colored steel sheet is equipped in the forming press section, which can press the colored steel sheet with the thickness of 0.8~1.5mm. It is not needed to frequently adjust the clearance between the pressing rolls when pressing the sheet with different thickness, which can make the sheet come out from machine normally without scuffing of the coating film of the sheet.

3. The length of the finished sheet is measured by the electronic measurement instrument or mechanical measurement instrument. The helping hand wheel and the counter are used in the adjustment of the bending of arch sheet, which makes the operation simple and guarantees the quality and the dimensional precision.
4. The hoisting tool is light and handy (The weight of hoisting tool of the United States is 30KG. And the weight of hoisting tool of our company is 2KG). It is convenient to install and uninstall. It hoisting speed is very fast.

The joining type of the roof is self-lock, which makes it easy to install and safe with excellent water proof and storm resistance. The curving roof can directly be produced on worksite, effectively lowering the cost. The product is widely used on large-scale and mid-scale industrial construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre and so on.

Company introduction

We are located in Jiangyin city, Jiangsu province, specializes in manufacturing various types of high speed, high precision roll forming machines, with more than 20 years’ experience. It has gained highly praise by customers from all over the world, due to top quality and competitive price of the products. Company principle: top quality, low price.

We a professional manufacturer of cold forming equipment (especially high difficulty cold formed steel), wins the trust of customers by its honesty, pragmatic operation philosophy, advanced technology, innovative design thinking, excellent quality, superior after sales service, competitive price, etc.

Main products

We mainly produce all kinds of roof/ wall tile roll forming machine, C purlin, Z purlin, C&Z interchangeable purlin roll forming machine, uni channel forming machine, rack shelf roll forming machine, guardrail roll forming machine, cable tray roll forming machine, metal deck roll forming machine, down pipe roll forming machine, rolling shutter door roll forming machine, auto stacker, EPS/PU sandwich panel production line, slitting line, cut to length line, tube mill, etc, mainly in construction use.

After sale service

1). Engineer will give free training lessons to labors in buyer’s factory.

2). The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD100 for engineer per day.

3). During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.

4). We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.

Photo of the Factory

Photos of the Office

Our clients