
Construction Material Making Machinery , Semi Automatic Mgo Board Production Line
Mgo board production line Construction Material Making Larger Capacity for 1500 Sheets
We will supply full set mgo board production line from raw material
to finished products. Including face to face training and
installation. With good after sales service.
Semi-automatic MGO BOARD Production line
1. Production Line
MGO Board Production Line can produce all kinds of magnesium oxide
boards, they can be used for ceiling, wall skirting, decorating of
indoor wall and lining board for furniture. It can replace
three-ply board, five-ply board, flakeboard, MDF (Medium Density
Fiberboard ) and Gypsum Board. It is really environment product and
lower cost.
2. Raw material and cost analysis
The product is formed with crushed crop straw or sawdust and some
inorganic chemical materials at one time after roller-extruding.
The source of raw materials is widely and they are purchased easily
for customers.
3. Technology features
There is not any requirement about high temperature and high
pressure during production processing. The board will be formed at
one time after roller-extruding under the conditions of normal
temperature and normal pressure. This is a green
environmental-protection project, because that there is no waste
water, waste materials and waste gas during its production
processing. The finished board doesn't need high temperature
drying, air-drying and watering, and under the normal temperature,
they will dry well indoor. According to different production, our equipment has 6 models for
large-scale, middle-scale and small-scale. Our all equipment can
produce board with same quality and specification but different
production.
The board with the thickness of 2-60mm, the biggest width of 1,
300mm and unlimited length. So you can adjust the thickness of
board at will. The standard specification of the board is
1.22mX2.44m.
After-sale
After purchased the equipment, we will teach relevant technology
for free, and will go to your factory for installation and testing
until you can produce the qualified product by yourself. Our
company will train 2-3 technical personnel for free until he can
get the skill. We will take responsibility for provide technical
consultation and following-up service for a long time, the
equipment warranty period is one year.
1. We offer Technical Support until the workers know how to operate.
2. We provide free answers about all kinds of questions about the production,if necessary,pls call us freely.
3. We provide lifelong guidance about our equipment.visit client in regular times.
4. Provide equipment easy-broken pasts year in year.to insure your machine can working continuously.
we sincerely hope to establish relationship with company both home and aboard to get a better future hand in hand.
Our company produces the paper face plasterboard of saving energy and reducing consumption, and safety production, environmental protection, the reduction of labor intensity, improve automation, improve the yield, improve the overall quality of the product research and development and implementation, have made a great breakthrough, completely change the original ingredients forming and drying process, in the same output is the same, the original equipment can save investment is 50%, compared with a 50% saving electricity coal saving 30%, commissioning, 50% lower cost, and greatly improve the product quality.
The company can design and manufacture with annual capacity of 2 million m2 to 20 million m2 production equipment.
the paper face plasterboard drying methods can choose:
Test we can do before delivery:
Fireproof board test report Test standard: JC688_2006 < MGO board standard > | |||||||
Specification | 10mm | Produce date | 2014.08.06 | Test date | 2014.09.01 | ||
Test item | Technical requirement | Test results | Results | ||||
Density (t/m 3 ) | 1.0 | Qualified | |||||
Bending strength(MPa) | ≥10 | 14 | Qualified | ||||
Impact strength (KJ/M2) | ≥2.5 | 6.5 | Qualified | ||||
Moisture resistance | No moisture | No moisture | Qualified | ||||
Water content (%) | ≤8 | 5.7 | Qualified | ||||
Contraction rate when heated (%) | ≤0.3 | 0.10 | Qualified | ||||
Expansion when put into water (%) | ≤0.6 | 0.13 | Qualified | ||||
Water absorption (%) | ≤28 | 10 | Qualified | ||||
Crisp coefficient | ≥0.7 | 1.3 | Qualified | ||||
Warp when heated (‰) | ≤3(Corporation standard ) | 0.12 | Qualified | ||||
Put out of nails | E<6 | 6<e<10 | E >10 | 25 | Qualified | ||
≥25 | ≥20 | ≥15 |
mgo board machinemgo board production line
Magnesium oxide board have been used primarily as fireproof materials for walls and ceilings in office buildings, apartment complexes, residential constructions, hotels, theatres, restaurants, railway stations, airports, scientific research institutions, schools, hospitals, and stadiums. Some patterned products have been used as decorative boards.
It also can be used as an interlayer for building, movable
partitions, sound-absorbing structures, sound insulation
structures, heat insulation and preservation structures, sign
boards, fireproof partition walls, low fencing partitions,
fireproof pipeline, fireproof doors, cornice baffle boards, public
restroom dividers, baseboards, truck cabinets and billboards etc.
Shandong Chuangxin Building Materials Complete Equipments Co., Ltd
Shandong Chuangxin Building Materials Machinery Co., Ltd., as a new
and high technology enterprise registered at provincial industrial
and commercial department and a modern group enterprise integrated
with scientific research, processing and trade mainly focus on
research, development and popularization of decorating technique,
building materials technology and machinery. Its many patent
products were sold throughout China and some were exported to
Russia, Southeast Asia, Hong Kong and Taiwan. We have had rich
assets and intellectual property rights after many years, and in
July 2004, our products were awarded as many laurels such as State
Key New Product by State Ministry of Science and Technology,
Ministry of Commerce, General Administration of Quality
Supervision, Inspection and Quarantine and State Environmental
Protection Administration. With this company got much economic
benefit and social benefit, so it enjoys high popularity and good
credit in the society. The company is composed of Machinery
Factory, Technology Development Center, Decorating Materials
Factory, Handicraft Development Center and Research Institute of
Paint and Coatings, and it establishes cooperative relationship
with Higher Educational Institutions and Scientific Research
Academy in Beijing and Shandong. With perfect scientific research
production base, rich material conditions and technical force and
acute market feeling, the company reformed boldly and strengthened
exchange and cooperation with the world, and at the same time made
its technology and equipment always meet requirements of changing
market. The above let this company ranks as a leading enterprise in
the same industry. In the information times filled with opportunity
and challenge, all employers of our company will abide by the
management ideas of “Take Market as Principle, Take Scientific
Technology as Forerunner” and carry forward the company spirit of
“Only Innovation can bring competitive power and vitality”, to work
towards to key technological breakthroughs and develop industry,
and will exploit, develop and create wonderful tomorrow together
with all friends on the new and high technology road.