Cellular Plastic Horizontal Flammability Testing Equipment ISO 9772 Standard

Cellular Plastic Horizontal Flammability Testing Equipment ISO 9772 Standard

Application:

Used for determine the density of ISO845-1985 under the condition of less than 250 kg/M3 of foam under small sample in the small flame horizontal burning performance.

Standard:

GB/T8332-2008 "foam plastics combustion performance test method, the horizontal burning method ISO9772:2001 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame

Burning chamber:

1. Dimension is 0.5 m3, numerical control machine tool processing molding, circular modelling beautiful generous. High quality SUS304 stainless material/painting, has the characteristics of beautiful and rust corrosion.

2. There is exhaust system in the roof of chamber, which can exhaust waste gas after finish test; During the trial, this system is to stop state.

3. There is sealed toughened glass observation window on the chamber front during test, which is convenient for observation test.

Burner:

1. The burner is made by the company, fully meet ISO10093:1998 standard.

2. Specification: diameter Ф 9.5 mm, tube length is 100 mm, tube body with no tail device.

3. Burner wing top: having an opening of internal length 48 mm, internal width is 1.3 mm.

4. Flame height:38 mm

Other parameters:

1. Support gauze Φ0.8 mm stainless steel wire, mesh each side 6.4 mm, 215 mm long, 75 mm wide, high 13 mm; Beside equipped with 300 mm steel rule, minimum scale of 1.0 mm;

2. Support gauze holder: consists of two hob, belt can be adjusted to the required angle and the height of the fixture, sample network located at 175 mm above the bottom of the box body.

3. Illuminometer: measure the illuminance within the test chamber ≤20lx.

4. Timer: 0 ~ 99.99 s can be arbitrary set, accuracy of ≤1s.

5. One set scaleplate measure blue flame when burning, minimum scale 1.0 mm.

6. Gas supply: calorific value of 37 MJ/M3 of gas.

7. Flow: 965 ml/min.

Dongguan Hust Tony instruments Co., Ltd ( Tony International(HK)Co., Ltd. ) has been manufacturing and developing testing machines for more than 15 years.

Our Main products are Furniture Testing Instrument, Toys Testing Equipment,Textile Testing Instrument, Leather shoes Test Equipment, Universal Testing instruments, Continue its advanced design technology and concept, excellent technology of producing and outstanding system of quality management, Tony Instruments has achieved good repute in the fields of textile testing equipments, toy testing equipments, furniture testing and other measurement test equipments. Our long-term partners include the world's two largest inspection companies SGS and TUV. 

We produce equipments in line with international market testing standards, meanwhile, we provide customers with complete solutions for laboratory testing. 

- Design program for laboratory 

- Provision of all testing machines and consumables 

- Installation and training 

- Maintenance plan service 

- Professional calibration and measure services 

Some of our important customers, include: 

SGS in France, SGS in Vietnam, SGS in China, SGS in Korea, Intertek in China, SAT in China, BACL in Shenzhen, NSF in Shanghai, ITS, BV, TUV and etc. 

Sincerely administration make Tony sales network extend all over the world. Up to day Tony products spread to countrywide users. In overseas, we have customers from Vietnam, Thailand, Indonesia, Europe, Iran, Pakistan, USA, Canada, Mexico, Argentina and etc. 

Our Testing machines are widely used in Textile, Toys, Furniture, packaging, footwear, leather products, environment, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields.