Compact Small Ultrasonic Cleaning Equipment For Plastic Injection Molders Cleaning

Regular mold cleaning is the simplest defense against issues that cause unscheduled production interruptions.

An ultrasonic cleaning system produces cavitation bubbles within a non-toxic solution. This helps extend mold life by cleaning the molds thoroughly without damage, regardless of the shape, size or complexity of the mold, contaminant or mold material. The right combination of heat, detergent and time is key.

Features

• Faster than manual scrubbing
• Requires less disassembly
• Uses water based detergents
• Extends operational run times between scheduled maintenance
• Extends the life of molds and dies

BASICS

Tips

Use the right size cleaning unit/tank. Consider the size and number of the molds to be cleaned and the type of contaminants to be removed. Smaller-capacity units cost less than those with bigger tanks, but may crowd parts and clean less efficiently, which can result in still-dirty molds or longer running times to get the molds clean. A correctly sized tank allows enough space around the mold for proper ultrasonic cleaning to occur while conserving energy and cleaning chemicals.

Choose a water-based cleaning solution. Different solutions excel at cleaning different contaminants in ultrasonic cleaners. They generally are categorized as descalers, enzymatic detergents, low-pH cleaners and specialty detergents. Almost always, a high-pH cleaning detergent is ideally suited for cleaning production molds. Consider the material the molds are made of and the types of contaminants to be removed, and always use water-based detergents. They cost less and are safer to use and dispose of than solvents, which also are unhealthy for humans and require special precautions to control the dangerous vapors and hazardous waste materials they generate, adding time and cost.

Place the mold on a support rack at the bottom of the tank. Any mold placed into an ultrasonic unit for cleaning must be on a rack or tray, or in a basket. This allows the cavitation bubbles to penetrate all areas of the injection mold to ensure thorough cleaning.

Use the right temperature. Injection molds are cleaned most thoroughly when the ultrasonic detergent solution is maintained between 110°F and 165°F. Without maintaining a consistent temperature, heating and run time will vary with each batch, which can result in longer overall run times, or, if the temperature runs too hot, in breakdown of the cleaning detergent. Running the cleaner for extended periods at higher temperatures may effectively clean parts, but it will require extra electricity and waste time. As temperature increases, the number of cavitation bubbles initially increases before falling off. At the liquid’s boiling point, cavitation produced by ultrasonic sound waves introduced into the liquid stops completely.

What ultraosnic can do ?
Ultrasonic cleaners remove dirt, oils, lubricants, carbon, rust,and other types of grime that build up on engines and mechanical parts. Grooves, internal passageways, seals, and other hard to reach areas are cleaned easily, eliminating hours of disassembling and reassembling complex parts. Marine parts, turbo blade, heat exchanger ,Carburetors, cylinder heads, aluminum parts, are a few examples of components that are cleaned thoroughly with no manual scrubbing in an ultrasonic cleaner

Before and after:




Meanwhile ultraosnic clenaer are also good at other Application:

Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China.

We have been focusing on R&D of ultrasonic equipment & cleaning solution for more than 17 years with over 300 employees and plant size 39,000 square meters. Products include CE, FCC, PSE, KC and other safety certification, as well as ROHS,PAHS, REACH, SCCP environmental certification, and passed the factory audit BSCI, ISO9001 quality management system.

There are more than 200 patents & certificates in total. Our products range covers industrial ultrasonic cleaner, homeuse ultrasonic cleaner, commercial ultrasonic cleaner, full-automatic ultrasonic cleaning machine, ultrasonic transducer rod series, ultrasonic transducer plate series, tunnel cleaning machine, large hydrocarbon ultrasonic cleaning equipment with PLC, large ultrasonic cleaning equipment with vacuum implementation, etc.

2023 Skymen self-built Shaoguan industrial Park

2020 New Factory Industrial Park

Shenzhen R&D Basement

Shenzhen Marketing Center