ECE R118 Annex 7, NF P92-505 Thermal Radiant Melt Drop Testing Machine

ECE R118 Annex 7, NF P92-505 Thermal Radiant Melt Drop Testing Machine

Description:

This machine is suitable for test thermal melt material, in order to find out droplet combustion characteristics of building materials under the influence of the heat source or not. The experiment is material specimen under radiant heat source of the upper radiator under the specified conditions:
1) combustion of released gas;
2) drop of burning or non-burning drops;
3) combustion of fiber cotton.

Standard:

ECE R118 Annex 7-TEST TO DETERMINE THE MELTING BEHAVIOUR OF MATERIALS,

NF P 92-505 Dripping test with electrical radiator, used for melting materials

Specification:

1. Heat source:
The source of heat is an electric radiator with a useful output of 500W. The radiating surface is made of a transparent quartz plate with a diameter of 100mm; it is heated by coiling electric resistance wire, and on a spiral groove of refractory bracket.

2. Specimen holder:
The support for the samples is a metallic ring, on top of this support a grill, made of stainless steel-wire, is placed with the following dimensions: interior diameter 118mm, dimension of the holes 2.10mm square, diameter of the steel-wire 0.70mm.

3. Droplet collector:
The receptacle is a cylindrical tube with an interior diameter of 118mm and a depth of 12mm. The receptacle is filled with cotton wool.

A... 400-500W radiator; power can be set arbitrarily, inside the control chamber;

B... The handle can rotate 90 degrees to remove radiator

C... Power line, connect controller with radiator.

D... Base

E... Droplet collector

F... Adjust the handle; used to adjust the upper and lower height of the droplet collector.

G... Adjust the handle; used to adjust the upper and lower height of the specimen holder.

H... Specimen holder

I… Control chamber

A… Heating lamp

B... Display

C... Power: press this button, the system power.

D...The power input

E...Fuse

F...Radiator power supply interface

G...Calibration interface

Features:

1. All fixtures are made of stainless steel material, appearance nice and corrosion resistance;

2. Radiation bracket can be rotated, the rotation angle is greater than 90 degrees and easy to install the sample;

3. Sample installation height can be adjusted;

4. Electric power radiators

5. The radiant heat radiator can be adjusted linear through the power control automatic adjustment;

6. The radiation shield is a quartz glass and the opening diameter is 100mm ± 5mm;

7. The heat radiation reach to 3W / cm³ the position 30mm from the radiation shield plane.

8. Sample holder ring is made of stainless steel and the inner diameter is 118mm;

9. Take off the plate inner diameter is 118mm, depth 12mm, internal plug of cotton.

10. The domestic radiometer is included: ECE R118 round foil heat flow meter / radiometer

Range: 0-100 (kW/m2)

Receiving angle: 180°

Test Type: Total Heat Flow

Time constant: less than 1s

Cooling method: water cooling

Accuracy: ±3%

Fixing method: flange

YUYANG INDUSTRIAL CO., LIMITED (DONGGUAN YUYANG INSTRUMENT CO.,LTD) is Located in Wangjiang District (Dongguan City ,Guangdong Province, China),a famous historical town with prosperous industry and convenient transportation.

We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc. 

Decades of research and development strengthen the leading edge of YUYANG in this field, and established as an crucial role in R&D on high quality and high-cost performance of testing equipment. YUYANG’s testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, lithium battery, LED, photoelectricity, mobile, plastic and rubber, display, telecommunication, chemical industry, aerospace, building material and product, wire and cable, toys, furniture, textile and fabrix, etc. All YUYANG testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, ANSI, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.

YUYANG INDUSTRIAL CO., LIMITED (DONGGUAN YUYANG INSTRUMENT CO.,LTD) looks forward to cooperating with customer all over the world.

If you are interested in any of our products or would like to discuss a custom order. Please feel free to contact us. We are looking forward to forming succesful business with new clients around the world in the near future.