1.15g/Cm3 Fully Automatic MgO Board Production Line

China Advanced technology fully automatic magnesium oxide board production line

Magnesium oxide board production line

1. Brief introduction

Magnesium oxide board production line with fashionable design, reasonable structure, stable running manufactured board of even thickness in large production once through double- roller-extruding technology. This production line is equipped with shaking device which removes inside and outside air bubble, so our board is more smooth. In addition, we use the no-woven cloth as the separating film to increase the toughness and strength of the board. The machine can be adjusted arbitrarily, and then produce the board with the thickness of 2-60mm, the biggest width of 1, 300 mm and unlimited length. So you can adjust the thickness of board as you like.

2. Finished board size and features

2-60mm thickness

Biggest width:1300mm

Unlimited length

3. Finished board features

1. Oxygenic index%: 90

2. Level combustion: SO

3. Vertical combustion: SO

4. Water content rate: 10.9%

5. Capacity: 1.15g/cm3

6. Static bending intensity: 169.46Mpa

7. Density: T/ m3 1.13

8. Water resistance: Without chalking for 24 hours and there is no change on surface

9. No Three-wastes (waste water, waste gas and waste residue), no pollution and environmental protection

A. Project Feature:

1. The source of the production raw materials is widely with no regional restriction. The product is made of magnesia, mgcl2,fiber glass mesh, on-woven fabrics and other fillers. The board is formed one-time by the machine.

It is easy operation, low production cost, small investment and fast effectiveness.

2. The automatic mgo board production line in China has high automatic degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production.

3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.

4. It can produce according to different customers' request like size (length* width*thickness) , material .This automatic mgo board production line in China can produce boards Max length 3660mm and width is 1250mm.Thickness from 3-25mm.

B. Equipment Feature:

This automatic mgo board production line in China adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading no-woven cloth, compounding and repressing.

fireproof mgo board production line. It runs stably with high automatic degree, the specification of its product can be adjusted arbitrarily.

The equipment actually realizes the industrial production-line of new model building wall board, and the product have even and glazed surface with high compactness.

The equipment largely reduces the labor intensity of worker and thoroughly changes many shortages of the former casting forming with upright mould or flat mould, such as large mould usage, low recycling rate, required electrical heating or steam heating, single kind of product as well as the sound insulation and heat-preserving which don’t meet the market requirements.

Shandong Chuangxin Building Materials Machinery Co., Ltd., as a new and high technology enterprise registered at provincial industrial and commercial department and a modern group enterprise integrated with scientific research, processing and trade mainly focus on research, development and popularization of decorating technique, building materials technology and machinery. Its many patent products were sold throughout China and some were exported to Russia, Southeast Asia, Hong Kong and Taiwan. We have had rich assets and intellectual property rights after many years, and in July 2004, our products were awarded as many laurels such as State Key New Product by State Ministry of Science and Technology, Ministry of Commerce, General Administration of Quality Supervision, Inspection and Quarantine and State Environmental Protection Administration. With this company got much economic benefit and social benefit, so it enjoys high popularity and good credit in the society. The company is composed of Machinery Factory, Technology Development Center, Decorating Materials Factory, Handicraft Development Center and Research Institute of Paint and Coatings, and it establishes cooperative relationship with Higher Educational Institutions and Scientific Research Academy in Beijing and Shandong. With perfect scientific research production base, rich material conditions and technical force and acute market feeling, the company reformed boldly and strengthened exchange and cooperation with the world, and at the same time made its technology and equipment always meet requirements of changing market. The above let this company ranks as a leading enterprise in the same industry. In the information times filled with opportunity and challenge, all employers of our company will abide by the management ideas of “Take Market as Principle, Take Scientific Technology as Forerunner” and carry forward the company spirit of “Only Innovation can bring competitive power and vitality”, to work towards to key technological breakthroughs and develop industry, and will exploit, develop and create wonderful tomorrow together with all friends on the new and high technology road.