Vacuum Hydrocarbon Ultrasonic Cleaning Equipment

Automatic Vacuum Hydrocarbon Ultrasonic Cleaning Equipment For Precision Parts With Centrifugal Pump And Cooling System

Equipment Overview

This equipment is mainly composed of:

1st tank: Ultrasonic Cleaning + Filter + cooling system

2nd tank: Steam cleaning

3rd tank: Drying

Equipment advantages of Hydrocarbon Ultrasonic cleaning machine

1. Zero-emission environmentally friendly cleaning machine;

2. Generally, the liquid contains a certain amount of air under normal pressure. The liquid is blocked by air in the ultrasonic wave and affects the cleaning effect. The degassing system solves the problem of separating the air from the liquid in the liquid and inserts the slits, blind holes, and pores on the workpiece. The air is removed, so that the liquid is ultrasonically cleaned in an air-free state, that is, in a degassing state, which has a double effect and greatly improves the cleanliness;

3. The carbohydrate solvent and steam extracted from the vacuum tank and the drying tank are refrigerated and recovered in the gas-liquid separator, with no gas emission, safe and reliable.

4. Waterless cleaning process, the advantages are: the degreasing effect is currently the best cleaning, power saving, long-term recycling, zero emission, and meeting environmental protection requirements.

Product Specification:

Same series with different size for your choice:

Cooling system:

Ultrasonic gas-phase cooling cleaning machine is a kind of industrial cleaning equipment that uses organic solvents such as freon, methanol, trichloroethylene, tetrachloroethylene, xylene, etc. as cleaning agents. This type of machine has a good cleaning effect on rust and dirt, rosin, grease and other attachments, and is mostly used for cleaning in the electronic circuit board industry, hardware electroplating industry, vehicle parts, and medical equipment parts industries.

Structural composition of ultrasonic cooling system cleaning machine

Gas phase cooling ultrasonic cleaning machine is composed of ultrasonic system, electrical system, refrigeration system, circulating filter system, automatic heating and constant temperature system, etc.

1. Ultrasonic system

Ultrasonic system generally uses 28KHz ultrasonic to clean, bottom ultrasonic layout (sweep frequency circuit, power is continuously adjustable and displayed, can be controlled separately, and there is current indicator), the actual cleaning power needs to be based on the size and quantity of the cleaned workpiece Decided.

2. Electrical system

Using PLC human interface touch technology, independent circuits at all levels, can individually control the parameters of each slot.

3. Freezing system

This type of machine mostly uses a secondary refrigeration system at the upper end of the cleaning tank, and the first floor is a refrigeration area, which is connected to the refrigeration system. The other layer is the cold water freezing zone, which is connected to cold water freezing. Equipped with one chiller and one chiller, and the multi-stage working tanks share one set of refrigeration system.

4. Circulating filtration system

It is composed of stainless steel filter pump, overflow circulation device, liquid storage tank, etc. The stainless steel filter pump adopts the brand "Nanfang" brand pump, and the liquid storage tank is welded by SUS304 stainless steel.

5. Automatic heating and constant temperature system

The cleaning tank adopts a wall-type heating method, and the heating power needs to be determined according to the size of the tank and the organic solvent used; and is equipped with an "Omron" thermostat, which can control the temperature at any time.

Product Images:

Clean effect:

About our company:

History:
Skymen Cleaning Equipment Shenzhen Co., Ltd., was founded in 2007,which follows the brand development strategy of “based in Shenzhen, radiating throughout the country, expanding overseas”.
Skymen also owns a professional R&D team to keep the pace with international ultrasonic technology. A passionate and young sales team sell to the world through different channels.

Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China.

We have been focusing on R&D of ultrasonic equipment & cleaning solution for more than 17 years with over 300 employees and plant size 39,000 square meters. Products include CE, FCC, PSE, KC and other safety certification, as well as ROHS,PAHS, REACH, SCCP environmental certification, and passed the factory audit BSCI, ISO9001 quality management system.

There are more than 200 patents & certificates in total. Our products range covers industrial ultrasonic cleaner, homeuse ultrasonic cleaner, commercial ultrasonic cleaner, full-automatic ultrasonic cleaning machine, ultrasonic transducer rod series, ultrasonic transducer plate series, tunnel cleaning machine, large hydrocarbon ultrasonic cleaning equipment with PLC, large ultrasonic cleaning equipment with vacuum implementation, etc.

2023 Skymen self-built Shaoguan industrial Park

2020 New Factory Industrial Park

Shenzhen R&D Basement

Shenzhen Marketing Center