
Description:
The extra-breadth and high-strength woven geotextile is widely used in soft soil foundation improvement,soil and gravel course separation,water discharge and seepage prevention to effectively prevent surfacing of soil and sinking of bed course. Such geotextile has incomparable advantages in reinforcement over the geogrid.
Quick detail:
Weight: 250g/m^2
Width: ≤6m
Tensile strength: ≥8.0kn/m
Features:
1. With good porosity and water permeability, the geotextile allows the passage of water and effectively retains soil and gravel.
2. With good water conductivity, the nonwoven geotextile forms a water discharge channel in the soil and discharges redundant liquid and vapor in the soil.
3. By enhancing the tensile strength and anti-deformation performance, the geotextile increase the structural stability of buildings and improves the soil condition.
4. It can effectively diffuse, transmit of allocate stress to prevent external force from damaging the soil.
5. It can avoid mixing of upper and lower gravel courses or the mixing of soil and concrete.
6. There is rare chance of mesh orifices being blocked because the mesh made up of flexible fibre is adaptabe and moveable.
7. High water permeability. It maintains good water permeability under the stress from soil and water.
8. Corrosion resistance. Made of chemical fibres like polypropylene and polyethylene, it is resistant to acid, corrosion,worm and oxidization.
9. Application is convenient due to light weight and convenient handing.
10. Competitive advantage. High permeability, Corrosion resistance, Convenient application, Good water conductivity, Low cost
Specifications:
Nonwoven Geotextile NGT250 Technical Specification | |||
Property | Test Method | Unit | Index |
Weight | ASTM D5261 | g/m² | 250 |
Weight tolerance | +/-10 | ||
Thickness | mm | 2.1 | |
Tensile strength | kn/m | 8.0 | |
Elongation | %≥ | 25 | |
Trapezoid Tear Strength | ASTM D4533 | kn | 0.20 |
CBR Puncture Resistance | ASTM D6241 | kn | 1.2 |
Equivalent bore diameter | mm | 0.07~0.2 | |
Vertical filtration coefficient | ASTM D4491 | cm/s | 10-1~10-4 |
Packaging | Details | ||
Roll Dimensions(W×L) | According to customer requirements | ||
Square Meters Per Roll |
| ||
Estimated Roll Weight |
|
Applications:
Hydraulic project
Sea embankment, river bank, lake dike
Tideflat reclamation works
Flexible mattress
Sand-filled geotextile bag
Anti-flood rescue work
Road construction
Soft soil improvement
Slope protetion
Road surface anti-reflection
Joint coruse
Drainage
Greenbelt
Railway project
Railway bed course reinforcement
Railway slope reinforcement
Tunnel anti-water skirting
Covert ditch for water discharge
Power plant project
Earthwork for nuclear
Power plant
Fly ash dam for coal-fired
Power plant Hydropower station
Aviation project
Runway foundation improvement
Structural course for apron
Foundation and surface
Airport road and drainage system
Ningbo Honghuan Geotextile Co.,LTD
Ningbo Honghuan Geotextile was established at 2003, and dedicated in woven geotextile and nonwoven geotextile industry for more than 10 years. After ten years effort and development, now we became one of the leading high strength woven geotextile manufactory in China, we have 100 more workers, 15000 square meters plant, sales amount above 12 million USD in 2013. In 2014, we established Yuyao Honghuan Trading Co.,LTD, and started business of Geomembranes, Geogrids, GCL and other geosynthectic products. With rapid growing, we will push ourselves to become a leading supplier of geosynthetic products in China.
Our factory along with our partners focus on most kinds of woven geotextiles and nonwoven geotextiles together with it’s extension products-geotube. In woven geotextile field, we manufacture and supply silt film woven geotextile, monofilament woven geotextile and mutifilaent woven geotextile. In nonwoven geotextile field, we manufacture and supply filament nonwoven geotextile, short fiber needle punched nonwoven geotextile, and thermocalendered nonwoven geotextile. In geotube field, we manufacture and supply dewatering geotube and revetment geotube. In order to give our customers more faith in our quality, we work with GSI-LAB and GAL-LAB to test our geosysthetic products, to ensure our products are qualified. With good quality, our products are exported to more than 20 countries and regions all over the world.
We are committed to offer our customers the widest range of high quality and optimum price products and engineering services to enable them to implement challenging projects and meet their targets in terms of performances, cost and time.
As a company committed to find a most optimum solution for every single geosynthetic need of our customers, we will listen to your concerns and requirements rather than trying to force you into a product. Our services do not stop after a purchase order, but continues to help you throughout the process until the project completed. when you are unsure of which product is the most ideal for your application ,we will listen to you and guide you to pick out the best selection for your location. We are always standing by and ready to deliver the assistance in any way we can.