Automatic Feeding Plate Shearing Machine 20' Long Hydraulic CNC Guillotine Shear

Atomatic Feeding Plate Shearing Machine 20' Long Hydraulic CNC Guilltotine Shear

buy hydraulic guillotine shear, hydraulic shearing machine,hydraulic cutting machine, sheet press brake machine, CNC press brake,tandem press brake

Shear machine Summary
This instruction manual of hydraulic shearing machine attached with the machine is very important documents to instruct theuser to use and maintain the machine correctly, and keep this manual properly

for check if necessary.
The sheet metal guillotien shear machine is designed, manufactured or inspected according to the standards as below:
GB/T 28762-2012 << NC shears>>
JB/T 5197-91<<Technical Conditions of Beam Shear >>

Shear machine Specification and Parameters

CNC sheet seharing machine Standard configuration

Features of Machine for 8'' sheet shearing machine

• The plate cutting machine frame of machine is welded construction with steel plate and the machine is driven by
• the Nc guillotine shear with hydraulic system, the machine working steady and reliably, low noise and easy to operate.
• The machine is equiped with front and back gauge. The backgauge is controlled by NC system,
• and adjusted conveniently, accurate and reliably. The frontgauge use a gauge ruler to measure
• and stop finger to positioning. The stroke of upper beam can be adjusted stepless, to improve
• the strokes when cutting the narrow sheet. The safety barrier guard is installed at the blades area
• of the machine for safety operation, and the sheet can be fed into the center of sheet pressing
• cylinder directly. The mechanism of the blades gap and the mechanism of shearing angle can be
• operated simply, conveniently.
• front feeding Deivce:
• the machien equip the automatic front feeding device, it adop the touch screen system to control
• and drive by servo motor. the clamping system is pnenmatic type. it tighly clamp the sheet to forward moving quickly, it will slowly move when it close the back gage and automatic push sheet on the back gauge.

Character

• the guillotine shear machine equip the front feeding device and rear unloading device. the shear blsde use the Cr12Mvo material,
• All steel welded structure,vibrating treatment of ageing for removal of internal stress,with good rigidity and stability.
• CNC front feeding guillotine shear with Intergrated hydraulic transmission system,with good reliability.
• Triple support rolling guide raikl to eliminate gaps of support and enhance shearing quality.
• Mechanical rear stopper with manual fine tuning,and digital indication.
• Clearance in between shearing blades adjusted by hand wheel to be quickly.
• accurate and convenient.
• Rectangular blades with four cutting edges to prolon working life,adjustable
• shearing angle to reduce deformation of the sheet.
• Upper blade holder has inward tilting struction to facilitate material feed in and also
• enhance of the work piecision.
• Function of shearing in section,function of aligning with light

Enclosed Accessory

• Front arm support, 6pieces
• Anchor bolt, 4 pieces
• Nut, some pieces
• Washer, some pieces
• Oil gun, 1 piece
• Foot pedal 1 piece
• pneumatic device 1 peice

Operational & Environmental Conditions of Machine

The machine must be located in the shop where direct sunlight shine shall be avoided, and
environment is with low humidity, less dust and good ventilation.
Caution: Please read attention of safety operation in this machine carefully before starting use.

Machine picture:

WUXI JINQIU MACHINERY CO.,LTD was founded in June 1969. it is located in No.99Qianluo road

Qianqiao town Huishan district Wuxi city. It is at Wuxi Vocation park. It mainly produces hydraulic press brake,

hydraulic shear, CNC sheet V grooving machine, allotype surface quick forming machine, CNC hydraulic turret

punching machine and other series products. It is one of the backbone enterprises in the domestic forging

industry with 40 years’ history.

The company covers an area of 62000 square meters with over 50000 square meters construction area.

It have advanced production equipments with imported large CNC gantry milling machine, imported large

CNC boring and milling machine, 100T carriageway and a series of iconic devices.

Company’s excellent design team can make personalized products according to the user’s demands which

to maximize customer value and optimize customer cost performance. Meanwhile, the company have always

stood in the forefront of technological innovation, continued to explore the “JQ”brand products widely and deeply,

and also attached great importance to the research cooperation. it has established long-term cooperative relations

with Jiangnan university, Nanjing university of Aeronautics and Astronautics, Jiangsu university, and also has set up

long-term stable cooperative relationship with the word’s leading multinational companies. Our hydraulic press brake

and shear machine have formed serialization

To met the customer’s different requirements.

Especially since 2002, the company has continued to increase investment in science and technology, our innovation

ability improves yearly through research staff’s innovation and hard work. We has received dozens of national invention

patents and utility model patents, won the provincial high tech enterprise in 2007, and obtained the innovation and reward

fund support from the national ministry of science and technology in 2011.

The company always adhere to quality system has access to the export product quality permit ISO 9000 international quality

system certification CE certification.

We sincerely hope to establish a close cooperation with domestic and foreign customers.

old factory area was founded since 1969 years that produced the hydraluic plate press brake mchine and hydraulic

sheet shearing machine

workshop view at old factory

we moved into new factory in 2008 years to process the CNC draulic press brake,CNC tandem press brake machine,

hydraulic shearing machine, CNC sheet V grooing machine,hydraulic iron worker, 3 roller plate rolling machine

and hydraulic press

machine body of plate press brake &shearing machine process workshop

parts machining workshop for hydraulic bending machine, hydraulic guillotine shear, sheet V groover

CNC press brake machines assembling workshop

workshop for producing the hydraluic sheet cutting machine

workshop use to assemble the CNC sheet V grooving machine

workshop use to assemble the heay press brake machine,light pole bending machine and CNC hydruilc tandem press brake

warehouse use to store the hydraulic swing beam shear and hydraulic guillotine shear

storeshouse use to store theNC press brake and CNC press brkae machine

our company hold the signing ceremony of sales tanks in second half of the year with all sales men on 2019. 6 30.

16x6300 shearing machine export to Vietnam